Some attempts to achieve lossless level........ RCA cables handmade ....

Today I’ve decided to build a simple cheap  RCA cable to transfer analog signals from ur cd/dvd player to an amplifier receiver.

Like usual I do I started to wander around blogs forum and technical data of many cables.

The main problem of the very cheap bad standard cables among their bad features are the high grade of inner capacitance , RF shield troubles, the high frequencies cut and the bad detail.

Then I decided to go for 2 different ways and then compare them on field, connected to my system!!!!

The first was to swing 2 standard wires oversized to wrap them with silver cooking foil

 ;-))  and slip this manufact inside a thermo astringen sheath and warming it all some time on the fire.

The second way I decided to follow Is to use a good quality sat-cable and connect it to RCA plugs!!!
much more simple and fast to realize!

The result after more than 1 hour of comparisons is that the former cable give a nice warm tonal to the sound leaving details and high frequencies around the same!
The latter cable build with the sat-cable gives to the sound a very high dynamic plenty of details without losing in bass tonality wich could be perceived backward just 'cause this huge amount of details.
I didn't find it fadiguing sound but impressively neutral and unveiled.......who loves warmthy will choose the former cable.....much more bassy and veiled!! ;-)
The standard cable result less of both these 2 home made cable...... ;-)